Innovative Power Products offers a full range of heat-shrinkable cable accessories used to terminate, splice, repair, protect and seal low and medium voltage cable, equipment, and cable-to-equipment connections

P Mod
  • propane torch PFT-1016 HS Self-igniting, clean-burning powerful flame for medium to large jobs. Recommended for installation of all high and low voltage products. Comes with 9/16-L.H.male thread end fitting for easy adaptation to standard propane hoses. Approximately 32,000 BTU/hour.
    Torch Only: Hose, regulator and tank not included.
G Mod
  • propane torch PR-1010

    PR-1010

    PR-1010
    Regulator, fixed with tailpiece

    Regulator, variable with guage (0-30 psi)

    Regulator, fixed pressure, with end fitting for disposable
    propane cylinder and 3 foot hose, fixed at regulator

Ground Braid
  • propane torch PH-1110

    PH-1120

    10 foot long LPG hose with female threads each end

    20 foot long LPG hose with female threads each end
Ground Clamps
  • propane torch HAG-110


    HAG-220

    110 volt Hot air gun for use on all low voltage products and mostmedium voltage accessories. Not recommended for MV. Splices

    220 volt Hot air gun for use on all low voltage products and most medium voltage accessories. Not recommended for MV. Splices
E Mod
  • propane torch Blanket

    Heat shield: woven fabric with eyelets. Protects adjacent components from torch heat for safety: Size 12” X 40”
MVT 400 Mod Kit
  • propane torch SMB 202
    SMB 205

    SMR 307
    SMR 309

    FCM 90824
    Black sealing mastic for general sealing 0.5” W x 0.125” T x 12” L
    Black sealing mastic for general sealing 1.0” W x 0.20” T x 12” L

    Red sealing material 1.0” W x 0.25” T x 12” L
    Red sealing material 2.0” W x 0.035” T x 15” L

    Field control/Oil-blocking material 1.0” W x 0.06” T x 24” L
MVT 500 Mod Kit
  • propane torch MSH 2015
    MSH 2030
    MSH 2050

    MSH 1050
    MSH 1100
    Tinned copper mesh width 2.50”; 15 foot roll
    Tinned copper mesh width 2.50”; 30 foot roll
    Tinned copper mesh width 2.50”; 50 foot roll

    Tinned copper mesh width 1.00”, 50 foot roll
    Tinned copper mesh width 1.00”, 100 foot roll