Innovative Power Products offers a full range of heat-shrinkable cable accessories used to terminate, splice, repair, protect and seal low and medium voltage cable, equipment, and cable-to-equipment connections

P Mod
  • propane torch PMod 1





    PMod 2
    P mod kit preparation kit contains: 6 solvent-saturated, lint-free cloths with one #120 grit aluminum oxide abrasive strip, 24” long. One Pmod kit is required for three 1/C or one, 3/C terminations or joints.


    Innovative Power Product’s low voltage sealing breakout boot, CBB is a heatshrinkable 3 or 4-leg boot with precoated adhesive in the legs for permanently sealing to the cable cores and precoated adhesive in the body for sealing to the cable jacket or conduit or riser. The CBB is an inexpensive method for sealing and mechanically strain-relieving the crotch area where either individually jacketed wires or cores of a multi-core cable exit a common jacket.
G Mod
  • Solderless ground clamp accessory contains: stainless steel, constant force spring, conductive adhesive-backed copper foil tape, moisture blocked, tinned copper braid and installation guide.

    propane torch GMod 1


    GMod 2


    GMod 3
    For a cable insulation diameter range of 0.30” - 1.25” with a #10 AWG solder-blocked, tinned copper 24” braid

    For a cable insulation diameter range of 0.95” - 2.15” with a #7 AWG solder-blocked, tinned copper 24” braid

    For a cable insulation diameter range of 1.55” - 3.40” with a #4 AWG solder-blocked, tinned copper 24” braid
Ground Braid
  • GB110 Tinned Copper Braid, #10 AWG, 100 foot roll
    GB108 Tinned Copper Braid, #10 AWG, 100 foot roll
    GB107 Tinned Copper Braid, #10 AWG, 100 foot roll
    GB106 Tinned Copper Braid, #10 AWG, 100 foot roll
    GB104 Tinned Copper Braid, #10 AWG, 100 foot roll
Ground Clamps
  • GC 1 Solderless Ground Clamp 0.5 Stainless Steel Consant Force Spring
    GC 2 Solderless Ground Clamp 1.0 Stainless Steel Consant Force Spring
    GC 3 Solderless Ground Clamp 1.5 Stainless Steel Consant Force Spring
E Mod
  • E mod Kits are heatshrinkable nontracking weather sheds for increasing the surface creepage distance of the IPP type MVT indoor termination(s). Shed requirements: (5 & 8kV=1), (15kV=2), (25kV=3), (35kV=4)

    propane torch EMod 1

    EMod 2

    EMod 3

    EMod 4

    Emod 5
    For a cable insulation diameter range of 0.35” - 0.85”

    For a cable insulation diameter range of 0.80” - 1.50”

    For a cable insulation diameter range of 1.10” - 2.00”

    For a cable insulation diameter range of 1.50” - 3.50”

    For a cable insulation diameter range of 2.00” - 4.50”
MVT 400 Mod Kit
  • MVT400mod kits are heatshrinkable kits for converting 3/C jacketed, armored or unarmored
    cable into three 1/C cables for use with IPP type MVT, sheltered (indoor) or exposed (outdoor)
    termination(s). A standard package is one mod kit for use with three 1/C terminations..


    Mod Contents with Boot:
    (3) Phase Jacketing Tubes, (3) Ground Jacketing Tubes
    (1) Cable BreakoutBoot,
    (1) Cable Tie, (1) Installation Guide
    *Sealant as Required

    Catalog # Insulation Diameter Jacket Diameter
      min. - max. min. - max.
    MVT400mod1
    MVT400mod2
    MVT400mod3
    MVT400mod4
    0.32" - 0.41"
    0.40" - 0.95"
    0.70" - 1.55"
    1.30" - 2.16"
    0.80" - 1.75"
    1.10" - 2.75"
    1.75" - 4.00"
    2.25" - 5.00"
MVT 500 Mod Kit
  • MVT500mod kits are heatshrinkable kits for converting 3/C jacketed, armored or unarmored cable into three 1/C cables for use with IPP type MVT, sheltered (indoor) where no seal to the 3/C cable jacket is required or Exposed (outdoor) termination, where the 3/C cable jacket is sealed with a mechanical connector e.g. JAG type or TECK type connector. A standard package is one mod kit for use with three 1/C terminations.

    Mod Contents with Boot:
    (3) Phase Jacketing Tubes, (3) Ground Jacketing Tubes
    (1) Installation Guide


    Catalog # Insulation Diameter
      min. - max.
    MVT500mod1
    MVT500mod2
    MVT500mod3
    MVT500mod4
    0.32" - 0.41"
    0.40" - 0.95"
    0.70" - 1.55"
    1.30" - 2.16"