5kV Medium Voltage Termination
Class 1 Termination for single-core 2.3-6.6kV extruded dielectric, shielded power cable


The Innovative Power Products MVT 0530 series Class I terminators are heatshrinkable 5kV (2.3-6.6kV) extruded dielectric, shielded medium voltage power cable terminations. The MVT 0530E series terminations are for applications where the terminator is exposed to the elements such as precipitation or direct outdoor sunlight.

MVT kits provide a lightweight, compact and flexible alternative to porcelain terminators. This allows the installation of the system in low profile switchgear and other enclosures requiring multiple cable-to-busbar connections. The MVT system does not add any significant weight to the cable, therefore no special hardware is required to support the completed termination

  • MVT kits are factory engineered to provide fast and easy installation with reliable performance. All MVT kits are designed to meet or exceed the requirements of IEEE-48 for Alternating Current Cable Terminations.

  • MVT 0530 kits cover a wide range of conductor sizes and shapes. They accommodate out-of-round or off-tolerance cables in both round and sector shaped conductors. The standard kits fit all types of cable constructions, including: metallic tape shield, drain wire shield, lead covered and Unishield® power cables. Five (5) kit sizes cover all cable sizes from 8 AWG through 1000 kcmil.
MVES050
Electrical Specifications: Related Accessories
 
Test Requirement
Value MVT 530
AC withstand, 1 minute (60 hz)
25 kV PASS
DC withstand, 15 minutes
50 kV PASS
Discharge Extinction Voltage (<3pC)
4.5 kV > 4.5kV
Impulse withstand 1.2 x 50 μs (crest kV)
75 kV > 75kV
Wet withstand , 10 seconds
25 kV PASS
Dry withstand, 6 hours
15 kV PASS
Continuous current rating
= Cable = Cable
   
Bill of Materials: One kit terminates one 1/C cable end. Std. Pkg.= 3 kits
 
Key
Item Description
Quantity Supplied
1
Field Control Material
1 strip In All Kits
2
Field Control Tubing
1 tube In All Kits
3
Non-Tracking Tubing
1 tube In All Kits
4
Sealant Strips
as required In All Kits
-
Installation Guide
1 each In All Kits
       
Options: Mod. Kits: requirements for one kit
     
Key
Item Description
Quantity Nomenclature
5
Non-Tracking Sheds
1 piece E - Emod Kit**
6
Sealed Ground Kits
1 piece G - Gmod Kit**
-
Cable Cleaning Kit (Not Shown)
1 kit P - Pmod Kit**
-
Terminal Lugs
1 piece Factory Quoted*



  • To download a PDF copy of the data sheet Click here.

    For a complete PDF of the current IPP catalog Click Here. If you would like the catalog in a printed version, please go to the "Catalog Request" page via the link at the top of the page.


The kits are packaged to provide three (3) single-core terminations. Everything is included to terminate three, single cores less the terminal lugs and external grounding components. External grounding components can be included as a kit option. Connectors can be supplied in the kits; subject to factory quote. See section 5 for connector information.



  • MVT 0530: Price List PL-611

5kv Selection Guide
   
Conductor Range Catalog #

Insulation

Diameter

Jacket
Diameter Max.

6 - 2 AWG MVT 0531 0.40 - 0.61 0.82
1 - 3/0 AWG MVT 0532 0.50 - 0.80 1.10
4/0 - 350 kcmil MVT 0533 0.70 - 1.05 1.25
500 - 1000 kcmil MVT 0534 1.00 - 1.50 1.75

All dimensions in inches unless shown otherwise


Ordering Information

1. Select the kit catalog number by the cable size. The kit contains everything needed to terminate 1/C cable end, less the connectors for sheltered (indoor) use. Confirm the dimensions when at the extremes of the size range.
SPACE
2. Add the mod kit letter designation as needed to change the base kit:

E - sheds are required for exposed
(outdoor) environments. (Emod)
P - cable cleaning kit (Pmod)
G - sealed grounding kit (Gmod)
     
Examples
     
Example 1:
For 1/C, 2/0 AWG, 5 kV cable installed in an exposed (outdoor) location,using a sealed grounding kit (Gmod) and a cable preparation/cleaning kit:

MVT 0532 EGP - Product# Breakdown
05 -
5kv Class 1 Termination base kit
32 -
3 - 1/C term/box and kit size
E -
Exposed, Sheds included
G -
Sealed grounding kit
P -
Cleaning/prep kit

  Example 2:
1/C, 500 kcmil, 6.6 kV cable installed in a sheltered (indoor) location, using a sealed grounding kit(Gmod) and a cable preparation/cleaning kit

MVT 0534 EGP - Product# Breakdown
05 -
5kv Class 1 Termination base kit
34 -
3 - 1/C term/box and kit size
G -
Sealed grounding kit
P -
Cleaning/prep kit



* CONNECTORS: To have connectors supplied in the kits, please refer to Section 5 in this catalog for connector selection information. The connectors must be ordered separately but can be packaged within the kits if detailed information is supplied.
** Supplied if specified.
*** WRAPAROUND SLEEVE with stainless steel channel– Contact IPP for more information.


QUESTIONS OR QUOTES EMAIL US AT: sales@ippcorp.com or CALL TOLL FREE 1-800-544-4626