8kV Medium Voltage Termination
Class 1 Terminator for single-core 7.2-11kV extruded dielectric, shielded power cable

The Innovative Power Products MVT 0830 series Class I terminators are heatshrinkable 8kV (7.2-11kV) extruded dielectric, shielded, medium voltage power cable terminations. The MVT 0830E series terminations are for applications where the terminator is exposed to the elements such as precipitation or direct outdoor sunlight.

MVT kits provide a lightweight, compact and flexible alternative to porcelain terminators. This allows the installation of the system in low profile switchgear and other enclosures requiring multiple cable-to-busbar connections. The MVT system does not add any significant weight to the cable, therefore no special hardware is required to support the completed termination.

  • MVT kits are factory engineered to provide fast and easy installation with reliable performance.

    All MVT kits are designed to meet or exceed the requirements of IEEE-48 for Alternating Current Cable Terminations.

  • MVT 0830 kits cover a wide range of conductor sizes and shapes. They accommodate out-of-round or off-tolerance cables in both round and sector shaped conductors. The standard kits fit all types of cable constructions, including: metallic tape shield, drain wire shield, lead covered andUnishield® power cables. Four (4) kit sizes cover all cable sizes from 4 AWG through 1000 kcmil.
Electrical Specifications: Related Accessories
Test Requirement
Value MVT 830
AC withstand, 1 minute (60 hz)
35 kV PASS
DC withstand, 15 minutes
65 kV PASS
Discharge Extinction Voltage (<3pC)
7.5 kV > 7.5kV
Impulse withstand 1.2 x 50 μs (crest kV)
95 kV > 95kV
Wet withstand , 10 seconds
30 kV PASS
Dry withstand, 6 hours
25 kV PASS
Continuous current rating
= Cable = Cable
Bill of Materials: One kit terminates one 1/C cable end. Std. Pkg.= 3 kits
Item Description
Quantity Supplied
Field Control Material
1 strip In All Kits
Field Control Tubing
1 tube In All Kits
Non-Tracking Tubing
1 tube In All Kits
Sealant Strips
as required In All Kits
Installation Guide
1 each In All Kits
Options: Mod. Kits: requirements for one kit
Item Description
Quantity Nomenclature
Non-Tracking Sheds
1 piece E - Emod Kit**
Sealed Ground Kits
1 piece G - Gmod Kit**
Cable Cleaning Kit (Not Shown)
1 kit P - Pmod Kit**
Terminal Lugs
1 piece Factory Quoted*

  • To download a PDF copy of the data sheet Click here.

    For a complete PDF of the current IPP catalog Click Here. If you would like the catalog in a printed version, please go to the "Catalog Request" page via the link at the top of the page.

The kits are packaged to provide three (3) single-core terminations. Everything is included to terminate three single cores less the terminal lugs and external grounding components. External grounding components can be included as a kit option. Connectors can be supplied in the kits; subject to factory quote. See section 5 for connector information.

  • MVT 0830: Price List PL-621

8kv Selection Guide
Conductor Range Catalog #



Diameter Max.

4 - 2 AWG MVT 0831 0.47 - 0.66 0.91
1 - 2/0 AWG MVT 0832 0.55 - 0.85 1.16
3/0 - 350 kcmil MVT 0833 0.73 - 1.06 1.35
500 - 1000 kcmil MVT 0834 1.00 - 1.55 1.80

All dimensions in inches unless shown otherwise

Ordering Information

1. Select the kit catalog number by the cable size. The kit contains everything needed to terminate 1/C cable end, less the connectors for sheltered (indoor) use. Confirm the dimensions when at the extremes of the size range.
2. Add the mod kit letter designation as needed to change the base kit:

E - sheds are required for exposed
(outdoor) environments. (Emod)
P - cable cleaning kit (Pmod)
G - sealed grounding kit (Gmod)
Example 1:
For 1/C, 2/0 AWG, 8kV cable to be
installed in an exposed (outdoor)
environment, using a sealed grounding kit
(Gmod) and a cable cleaning kit:

MVT 0832 EGP - Product# Breakdown
08 -
8kv Class 1 Termination base kit
32 -
3 - 1/C term/box and kit size
E -
Exposed, Non-tracking Sheds (Emod)
G -
Sealed grounding kit (Gmod)
P -
Cleaning/prep kit (Pmod)

  Example 2:
For 1/C, 500 kcmil, 8kV cable to be installed
in a sheltered (indoor) environment, using
a sealed grounding kit (Gmod) and a cable
cleaning kit:

MVT 0834 EGP - Product# Breakdown
08 -
8kv Class 1 Termination base kit
34 -
3 - 1/C term/box and kit size
G -
Sealed grounding kit (Gmod)
P -
Cleaning/prep kit (Pmod)

* CONNECTORS: To have connectors supplied in the kits, please refer to Section 5 in this catalog for connector selection information. The connectors must be ordered separately but can be packaged within the kits if detailed information is supplied.
** Supplied if specified.
*** WRAPAROUND SLEEVE with stainless steel channel– Contact IPP for more information.

QUESTIONS OR QUOTES EMAIL US AT: sales@ippcorp.com or CALL TOLL FREE 1-800-544-4626