Street Lighting Kit Rated to 1KV

Innovative Power Products SLK02 and SLK02Tx, street light kits are heatshrinkable stub connection kits for electrically insulating, mechanically protecting and sealing stub connections for street light poles. The SLK02 kits cover a varety of conductor combinations and are rated to 1000 volts.

The SLK02T kits are designed for use with multi-conductor cables. The SLK02Tx kits have all of the components of the standard SLK 02 kit plus additional cable breakout boot(s),as required, to seal both the jackets and individual insulated conductors of the multi-conductor cables.

Heavy-walled, heatshrinkable materials ensure high quality insulated connections that will not unravel or fray. The SLK kits are a reliable method

The SLK02 base kit contains everything needed to seal; and insulate the connections, less connectors:

• 4 each heavy-walled heatshrinkable caps
• 4 each mastic sealant strips
• 1 each installation guide (1per standard pack)
• as req’d 4-leg cable breakout boots (for 4/C cables)
The completed tap splice is mechanically strong, electrical insulated, moisture-proof and provides excellent resistance to mechanical damage.

  • To download a PDF copy of the data sheet Click here.

    For a complete PDF of the current IPP catalog Click Here. If you would like the catalog in a printed version, please go to the "Catalog Request" page via the link at the top of the page.

  • SLK02: Price List PL-360

SLK Series

For cable combinations rated to 1000 volts, confirm the cable size/combinations to select the proper kit.

1. For cable combinations rated to 1000 volts, confirm the cable size/combinations to select the proper kit

2. Four, single-wire (1/C) runs with or without single wire (1/C) taps within the selection guide range, select the SLK02 kit.
3. Two, four-core cable runs with or without single-wire (1/C) taps, select the SLK02T2 that includes two breakout boots.

4. Two, four-core cable (4/C) runs with one, four-core cable (4/C) wire taps, select the SLK02T3 that includes three breakout boots.

Connection Wire
Combination Description
2 Runs
Fig. 1
2 Runs
Fig. 1
3 Grounds
Fig. 3
4-1/C wire runs & 4-1/C taps (no boot) #4-2AWG
#4-2AWG #6-4AWG SLK02
4-1/C runs & 1-4/C cable (= 4-1/C taps w/1 boot) #4-2AWG
#4-2AWG #6-4AWG SLK02T1
2-4/C runs & 4-1/C taps (w/2 boots) #4-2AWG
#4-2AWG #6-4AWG SLK02T2
2-4/C runs & 1-4C cable (w/3boots) #4-2AWG
#4-2AWG #6-4AWG SLK02T3

*Connectors: To have connectors supplied in the kits, please refer to Section 5, in this catalog for connector selection information. The connectors must be ordered seperately but can be packaged within the kits if detailed information is supplied